Medical gloves are disposable gloves that are used during medical examinations and procedures to help prevent cross-contamination between caregivers and patients. Medical gloves are made of various polymers including latex, nitrile rubber, polyvinyl chloride, and neoprene; They often come up, or make powder with cornstarch to lubricate gloves, making them easier to apply on hands.
Disposable Gloves Material
Nitrile is a synthetic rubber compound commonly used as a disposable glove material. Nitrile has been around for some time, but recently it has become more affordable, which explains why it is gaining popularity in the medical, food and hygiene industries
Natural Latex is made of sap cut from rubber trees. The sap is trapped in a foam and cooked in comfortable latex layers.
Glove Thickness
The thickness of the gloves was measured using a stereomicroscope. A 1 cm × 1 cm acrylic stent of latex glove pieces was obtained from the index finger area. The same area and protocol were followed to obtain samples for thickness measurements from each glove. The glove piece was held vertically and viewed under a stereiroscope. Grading readings were recorded in I-piece and multiplied with the factor 0.0257 converted to millimeters (mm)
Disposable Gloves Brand
- SAS Safety Nitrile Gloves
- The Safety Zone Nitrile Exam Gloves
- AMMEX Nitrile Disposable Gloves
- Maxiflex Ultimate Nitrile Work Gloves
- Safeguard Nitrile Disposable Gloves
- Venom Steel Nitrile Gloves
- Adenna D Nitrile Powder-free gloves
- Infi-Touch Heavy-duty Nitrile Gloves
Disposable Gloves Price
Prices of glove AS
50 Pcs (Size-S) Latex Examination Gloves (Pack of 50)
399 INR
Powder Free Gloves:
Powdered gloves were banned as part of the FDA, disagreeing with the claim that “non-powdered gloves have a greater tendency to tear and thus the use of non-powdered gloves leads to contamination, infection.” There is a greater risk of infection, or risk. For the user’s blood. “
The FDA ban also found that nitrile gloves “offer the same level of protection, dexterity, and performance as natural rubber latex.”
Chlorination is the most common option for making powder-free gloves that slip easily. During the purification phase, manufacturers wash gloves in a chlorine gas or hypochlorite and hydrochloric acid solution. The gloves are then rinsed to prevent the chemical from interacting with the gloves any further. The surface of the solution glove reduces the solution viability and gives it a softer texture.
Polymer Coating: Manufacturers use polymers such as silicon, acrylic and hydrogels. Because the polymer coating has less surface friction than the glove material, it is easier on hand. The polymer is usually applied while the glove is still in the former.
Leave a Reply